FILA MP90 ECO XTREME — High Performance Penetrating Sealer
FILA MP90 ECO XTREME — High Performance Penetrating Sealer
Couldn't load pickup availability
FILA MP90 ECO XTREME — High Performance Penetrating Sealer
FILA MP90 ECO XTREME (also sold as MP90 ECO PLUS) is a water-based, solvent-free high performance penetrating sealer. It seals and protects natural stone, quartz, polished porcelain tile, grout and terracotta against stains without altering the material's natural look. It is ready to use and the surface can be walked on after just 4 hours.
| Property | Detail |
|---|---|
| Brand | FILA |
| Product | MP90 ECO XTREME — High Performance Penetrating Sealer |
| Type | Water-based, solvent free |
| Suitable Surfaces | Porous and non-porous natural stone, quartz, polished porcelain, grout, terracotta, concrete; also encaustic cement tile and reconstituted stone; indoor and outdoor |
| Finish | Natural look; does not form a film, discolor or yellow over time |
| Dilution | None, ready to use |
| Dwell Time | 10 to 15 minutes, keeping the surface wet with sealer; then wipe and rub to penetrate and remove excess |
| Second Coat | If needed, apply immediately while the surface is still wet with sealer |
| Foot Traffic | Normal foot traffic after 4 hours |
| Full Cure | 8 hours (maximum sealer protection) |
| Coverage on Polished Porcelain Tile | 1,206-1,637 sq.ft. (112-152 m²) per gallon (3.78 L), per coat, indicative |
| Coverage on Polished Natural Stone | 819-1,206 sq.ft. (76-112 m²) per gallon (3.78 L), per coat, indicative |
| Coverage on Unpolished Natural Stone | 388-819 sq.ft. (36-76 m²) per gallon (3.78 L), per coat, indicative |
| Coverage on Quartz | 2,000 sq.ft. (186 m²) per gallon (3.78 L), per coat, indicative |
| Coverage on Grout | 1,600 sq.ft. (149 m²) per gallon (3.78 L), per coat; varies with tile size, joint width and grout porosity |
| Coverage on Terracotta | 640 sq.ft. (60 m²) per gallon (3.78 L), per coat, indicative |
| Application Temperature | 50°F to 86°F (10°C to 30°C) |
| Storage Temperature | 41°F to 86°F (5°C to 30°C) |
| Certification | Indoor Air Comfort GOLD (very low VOC emissions); contributes towards LEED credits |
| Warnings | Does not protect against acid stains. Test on a small, inconspicuous area or loose sample first. Do not apply outdoors if rain is in the forecast. Apply and dry in a well ventilated area. Outdoor flooring must be frost resistant and correctly installed |
| Packaging | 1 pint (16 fl oz, 473 mL), 1 quart (946 mL) or 1 gallon (3.78 L) |
- Water-based, solvent free; certified Indoor Air Comfort GOLD for very low VOC emissions
- Fast setup: walk on the surface after just 4 hours, full cure in 8 hours
- Does not form a film, discolor or yellow; keeps the material's natural look
- Not affected by residual humidity: can be applied 24-48 hours after initial cleaning
- Treated surfaces are safe for food contact; makes everyday cleaning easy
- Anti-graffiti protection; PFOA and PFOS not intentionally added
Use MP90 ECO XTREME to seal natural stone with polished, brushed and honed finishes, quartz, polished porcelain tile, grout and terracotta, including kitchen countertops and bathroom vanities. It is also suitable for encaustic cement tile, reconstituted stone, grout joints, crackle tile, marble resin and stone slabs. Apply with a paint pad, paintbrush or lambswool applicator, fully saturating a clean, dry surface (damp surfaces are acceptable once standing water is removed), let sit 10 to 15 minutes without allowing the sealer to dry, then wipe and rub to penetrate and remove all excess. Allow new grout installations to cure before application.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
Share
