Akemi Algae and Mildew Remover LONGLIFE 1 Liter - Extended Protection
Akemi Algae and Mildew Remover LONGLIFE 1 Liter - Extended Protection
Couldn't load pickup availability
Akemi Algae and Moss Remover LONGLIFE
AKEMI Algae and Moss Remover LONGLIFE is a self-acting, water-dilutable concentrate that removes green deposits — algae, moss, and slippery green films — and then keeps them from coming back. Built on a surfactant base with quaternary-ammonium active ingredients and free of chlorine, acid, alkali, and solvents, it is applied to the surface and left to work: dead deposits weather away naturally over the following days, and the treated surface stays clean for up to roughly a year. It is the long-term, preventive companion to the fast-acting AKEMI Algae and Moss Remover POWER, and is safe for a wide range of natural stone, cast stone, ceramic, wood, and plastic on facades, floors, stairs, walls, and roofs.
- Long-lasting protection — preventive effect lasts up to approximately one year
- Self-acting — apply and leave; no rinsing or scrubbing required
- Gentle chemistry — free of chlorine, acid, alkali, and solvents; pH-neutral
- Economical concentrate — dilutes 1:10 up to 1:50 with water
- Broad compatibility — natural and artificial stone, ceramic, wood, and plastic
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Self-acting, long-term algae & moss remover (biocidal cleaning concentrate) |
| Chemical Basis | Surfactant concentrate with quaternary-ammonium actives — free of chlorine, acid, alkali, and solvents |
| Color | Clear, colorless |
| pH Value | Approx. 7 (neutral) |
| Density | Approx. 1.00 g/cm³ (8.3 lb/gal) |
| Dilution | 1:10 to 1:50 with water |
| Coverage | Approx. 540 sq ft per liter of concentrate at 1:10 dilution (50 m²/L) |
| Application Temperature | 50–77°F (10–25°C) |
| Rain Protection | Protect treated surface from rain for at least 4 hours |
| Protective Effect | Up to approximately 1 year |
| Shelf Life | Min. 24 months, stored cool & dry at 41–77°F (5–25°C) |
| Available Sizes | 1 L · 5 L |
| Manufacturer Part Number | CARE.10983 |
- Self-acting formula — apply and leave to work; no rinsing or scrubbing needed
- Preventive, long-term effect lasts up to approximately one year against green, slippery films
- Free of chlorine, acid, alkali, and solvents; pH-neutral and gentle on treated surfaces
- Economical, water-dilutable concentrate (1:10 to 1:50)
- Suitable for a wide range of substrates — natural and artificial stone, ceramic, wood, and plastic
- Normally not aggressive toward garden plants, though contact should be rinsed off promptly
- Ideal follow-up to AKEMI Algae and Moss Remover POWER for lasting protection after a deep clean
Removes and prevents: algae, moss, and slippery green organic films, with a preventive effect that discourages regrowth.
Suitable surfaces:
- Natural stone — marble, granite, quartzite, Solnhofen slabs
- Artificial / cast stone (concrete cast stone)
- Ceramic, plastic, and wood
- Stone panels, facades, floors, stairs, walls, and roofs
- Pre-clean heavy soiling mechanically, or intensively clean first with AKEMI Algae and Moss Remover POWER.
- Dilute the concentrate 1:10 up to 1:50 with water, according to the degree of soiling.
- Apply the diluted solution with a watering can or sprayer (e.g. a garden sprayer) onto a preferably dry surface and let it work. Optimal processing temperature is 50–77°F (10–25°C).
- Protect the treated surface from rain for at least 4 hours. Do not apply in direct sunlight or heat.
- Do not rinse. Dead deposit residues are washed away naturally by rain over several days, or can be removed with a water jet.
- Use biocides safely. Always read the label and product information before use.
- Do not pour used or diluted product back into the original container.
- Do not apply in direct sunlight or in hot conditions.
- Normally not aggressive toward garden plants, but rinse any plants with water immediately on contact.
- Industrial chemical product — use only in well-ventilated conditions and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use biocides safely and only as directed. Use in well-ventilated conditions and wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
Share
